Description

 

Features:

ü Display: 2-inch
TN/ANTI-UV LCD

üDepth Capability: up to 100m

üPower Requirement: 4xAAA alkaline batteries
(not included)

üWaterproof design: level-4
(spray-water-proof)

ü Show water depth, fish location,
and bottom grass & rock

üUser selectable sensitivity, depth
units, and fish alarm setting

üOperational Temperature: -10°C to
50°C

How to use:

Put
the cable transducer in fishing spot

The
monitor displays information from sonar sensors that detect water and fish

The
transducer can detect water up to 100m, 45degree beam angle in 200khz

Fix
the float position in advance. Toss the sensor and float into the water.

For kayak fishing

1.      Attach the Side-Scan
Adapter to the boat hull using the mounting tabs

2.      Break though the hull of
a boat. Place the sonar sensor against the hull bottom 1 inch underwater.

Tips

1.      The fish lures and the
fish smaller than 3.94inch can’t be detected by the fish finder.

2.      This model of fish
finder doesn’t distinguish big fish and small fish normally. However, it can
show big fish and small fish by adjusting sensitivity to high level through
sensitivity setting.

3.      The transmitter
(transducer) is waterproof design but the receiver (fish finder with display)
is not. Keep the transducer in dry condition after fishing to extend its
product life.

Package:

1.      Fish Finder Display

2.      Sonar Sensor
(Transducer)

3.      Removable Transducer
Float with Rubber Stopper

4.      Transducer Side-Scan
Adapter

5.      Stainless Bolt and Wing
Nut

6.      Neck Strap

7.      User Manual